Test Equipment Depot XFTP SAT LITE, Руководство по эксплуатации

Страница: 27 / 32

27
XFTP SAT LITE Satellite Meter - Operation Manual
To highlight the memory location for your satellite configuration, simply
press or Direction Button(s) to move up and down through the list
one location at a time or press the or Direction Button(s) to move
through the list four configurations at a time.
Note: You may select an empty location or write over an
existing configuration location.
Saving Configurations
If you have changed any configuration parameters, you can save the new
configuration to the satellite configuration list. To save the new satellite
configuration, press the
C/S
Button.
Press the Direction Button or
ENTER
Button to save the satellite
configuration in the selected memory location. When saving the satellite
configuration, the instrument will briefly display the text “Saving...” in place
of the name of the satellite configuration as shown in the following figure:
When finished, press the
F4
Button to exit to the signal display mode.