Test Equipment Depot XFTP SAT LITE, Руководство по эксплуатации

Страница: 17 / 32

17
XFTP SAT LITE Satellite Meter - Operation Manual
3 3. Operation
Overview
The XFTP SAT LITE is designed to make satellite dish alignment easy and
fast. The operation includes the following steps:
•
Loading the satellite configuration.
•
Signal and quality level meter for fine tuning of the satellite dish
position.
•
Display of measurement screen to confirm setup.
Let’s Get Started
Turn the instrument power on by pressing the
POWER
Button at the bottom
left of the keypad.
The instrument will briefly display an introduction screen with the model
name, serial number, and firmware version number.
Loading a Satellite Configuration
After the power-up screen, the instrument will display the satellite
configuration list as shown in the figure below. You can also access the
satellite configuration list for loading from any screen by pressing the
FIND
Button.
Note: You can also use the
F4
Button from any screen
to go directly to the signal display mode.
You can load a new satellite configuration or use the last loaded
configuration (including a configuration loaded prior to power off) by
pressing the
F4
Button to go directly to the signal display mode.
To select a new satellite configuration simply press or Direction
Button(s) to highlight the desired configuration or press the or
Direction Button(s) to move through the list four configuration at a time.