2
International Electronic/Service Vacuum
Operating Instructions
Grounding/Earthing
Instructions
Specifications
This appliance must be grounded/
earthed.
The wires in this main lead are
colored in accordance with the
following code:
Green/Yellow: Earth
Blue:
Neutral
Brown:
Live
As the colors may not correspond
with the colored markings identifying
the terminals in your plug, proceed as
follows:
The wire which is colored Green/
Yellow must be connected to the
terminal in the plug which is marked
with the letter “E” or by the ground/
earth symbol “ ” or colored Green
or Green/Yellow.
The wire which is colored Blue must
be connected to the terminal in the
plug which is marked with the letter
“N” or colored Black or Blue.
The wire which is colored Brown
must be connected to the terminal in
the plug which is marked with the
letter “L” or colored Brown or Red.
Electrical
220-240 V
50/60 Hz
3.7 amps
Dimensions
Length
17-13/16 in.
Width
7-3/4 in.
Height
9-1/4 in.
Certification
Meets VDE RFI 0875 Conducted
Limits.
Motor
1 H.P.
Continuous duty rated with one sealed
ball bearing and one sleeve bearing
lubricated for life. Internal thermal
breaker opens at 221°F [105°C] and
automatically closes when motor cools
(after about 30 minutes).
BSI: Internal thermal breaker opens
at 274°F [120°C] and automatically
closes when motor cools (after about 30
minutes).
Conforms to EMC Requirements Defined in:
EUROPEAN STANDARD EN 55014 (1993) - Conducted Emissions
CISPR 14 Third Edition (1993-01) - Conducted Emissions
EN60555-3 - Harmonic Current Emissions (Class A)
IEC 1000-3-2 - Harmonic Current Emissions (Class A)
EUROPEAN STANDARD EN 50082-1 (1992), Immunity
IEC Publication 801-2 (1991) - ESD, Contact Discharge, Severity Level 4
- ESD, Air Discharge, Severity Level 4
IEC Publication 801-3 (1991) - Radiated Immunity, Severity Level 2
IEC Publication 801-4 (1998) - EFT, Severity Level 3
prIEC Draft 801-5
- Surge, Severity Level 3
DANGER
!
