TRANSPOSE
A transposition of the V/OCT output is possible (this will be applied before the quantizer, so the result will
always be within the set scale). When in this
key mode
, the upper row of illuminated buttons will set the
transposition for the first sequencer, and the lower row will set the second one.
Each button represents an amount of semitones to be added or subtracted as follows:
The transposition will be the sum of all active buttons. For example, to get +3 semitones, set ON the +1 and
the +2 buttons.
Setting all buttons ON will have the same result as all buttons OFF, so basically, there are several ways to get
the same result. This might seem confusing at first glance, but is a versatile way to manage a range of ±19
semitones with only 8 buttons. Plus, transposing one octave up or down is pretty easy (just click on the -12 or
+12).
Here are some interval examples:
+3 semitones
+12 semitones
+13 semitones
+19 semitones
-12 semitones
-10 semitones
