TESSERA EB-RE01B, Руководство по оборудованию, Страница: 19 / 23

19 / 23
TESSERA TECHNOLOGY INC.
When you do the serial programming with the SCI boot mode, set the short-pin below.
Do not connect emulator to SWD I/F(CN1) when using with SCI boot mode.
When you make the serial communication by UART, set the short-pin below.
Do not connect anything to Pmod
TM
connecter(CN3、CN7) when you use a UART.
Pmod
TM
connecter（CN3）
This connector is a Digilent Pmod
TM
compatible connector as the 12pin SPI connection.
When you use this connecter, set JP10, JP11 OPEN and do not connect anything to
Pmod
TM
connecter (CN7).
Pin connection Pin connection
1 P606 7 P300
2 P609 8 P301
3 P608 9 P305
4 P607 10 P704
5 D_GND 11 D_GND
6 IOVCC1 12 IOVCC1
Reference number Settings
JP10 1-2 （ RFP ）
JP11 2-3 （ RFP ）
JP12 Open
JP13 Close
Reference number
Settings Connection
JP10 2- ３（ UART ） P609 （ TXD2_C ）
JP11 2- ３（ UART ） P608 （ RXD2_C ）
JP12
1-2 （ CTS ）
2-3 （ RTS ）
P607
JP13 Close