TESSERA EB-RE01B, Руководство по оборудованию

Страница: 18 / 23

18 / 23
TESSERA TECHNOLOGY INC.
I/F Connector
SWD I/F（CN1）
You can make debugger connection on the SWD debug mode by connecting E2 emulator,
E2 emulator Lite, IAR I-jet and SEGGER J-Link.
20pin 1.27mm Pitch connector is mounted.
“19pin Cortex-M Adapter” perhaps be require.
Do not set the JP10 and JP11 to ” 1-2(RFP)”.
Connecter signal and connection
Pin connection Pin connection
1 VCC (internal voltage) 2 SWDIO
3 GND 4 SWCLK
5 GND 6 Pull-Up
7 - 8 N.C.
9 GND 10 RESET
11 5V (Voltage regulator input) 12 Pull-Down
13 5V (Voltage regulator input) 14 N.C.
15 GND 16 N.C.
17 GND 18 N.C.
19 GND 20 N.C.
USB connector (CN4)
This connector is connected to a USB-Serial transfer IC, and is recognized as a virtual
COM port by a PC.
Please download a USB driver from below URL.
URL： http://www.ftdichip.com/
Usually, the USB driver is install automatically on Windows PC.
You can use a virtual COM port as general purpose UART or serial programming with SCI
boot mode.
Set JP13 short-pin close.