1 Middle Pole Assembly With Pole Lock
1 ABS Lower Pole Assembly
Fully assembled, complete with two friction washers, mounting screw, and thumb nut.
1 8" Round Concentric Searchcoil With 3’ Cable
1 9 Volt Alkaline Battery
1 Operator Instruction Manual
1 Tesoro Warranty Card
If any of these items are missing, contact the Tesoro Authorized Dealer where you purchased
your detector immediately.
Assembly of the Silver µMax is simple and requires no special tools. Just install the battery,
mount the searchcoil on the lower pole assembly, connect the pole assemblies together, wrap the
excess cable around the pole and plug the cable into the control housing. Finally, adjust the pole
length and searchcoil angle and you're ready!
INSTALLING THE BATTERY
Your Silver µMAX is equipped with an automatic battery test circuit so that you can always be
sure you are getting top performance. The battery should be checked after the detector has been
on for about 10 minutes and then periodically when used for long durations.
