
18
ENG
Description
Reason
Solution
Washing machine
cannot start up
Door is not closed properly
Restart after the door is closed
Check if the clothes are stuck
Door can’t be opened
Washer’s safety protection
design is working
Disconnect the power, restart the product
Water leakage
The connection between
inlet pipe or outlet hose is
not tighten
Check and fasten water pipes
Clean up outlet hose
Detergent residues in
the box
Detergent is dampened or
agglomerated
Clean and wipe the detergent box
Indicator or display does
not light
Disconnect the power
PC board or harness has
connection problem
Check if the power is shut down and the
power plug is connected correctly
Abnormal noise
Check if the fixing (bolts) have been removed
Check it’s installed on a solid and level floor
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
TROUBLE SHOOTING
Description
Reason
Solution
Door is not closed properly
Restart after the door is closed
Check if the clothes is stuck
Water injecting problem
while washing
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Overtime water draining
Check if the drain hose is blocked
Water overflow
Restart the washer
Others
Please try again first, call up service line if there
are still troubles
NOTE
After the check, activate the appliance. If the problem occurs or the display shows other
alarm codes again, contact the service.
CAUTION!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be
inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower
cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can be hot water in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished
the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Содержание WF81493M
