18
ENG
Problem
Possible Causes
What to Do
There are rust stains on cutlery
The affected items are not
corrosion resistant.
Avoid washing items that are
not corrosion resistant in the
dishwasher.
A program was not run after
dishwasher salt was added. Traces
of salt have gotten
into the wash cycle.
Always run a wash program
without any crockery after adding
salt. Do not select the Turbo
function (if present), after adding
dishwasher salt.
The lid of the softer is loose.
Check the softener lid is secure.
Knocking noise in the dishwasher
A spray arm is knocking against an
item in a basket
Interrupt the program and
rearrange the items which are
obstructing the spray arm.
Rattling noise in the dishwasher
Items of crockery are loose in the
dishwasher.
Interrupt the program and
rearrange the items of crockery.
Knocking noise in the water pipes
This may be caused by on-site
installation or the cross-section
of the piping.
This has no influence on the
dishwasher function. If in doubt,
contact a qualified plumber.
The dishes are not clean
The dishes were not loaded
correctly.
See PART II “Preparing And
Loading Dishes”.
The program was not powerful
enough.
Select a more intensive program.
Not enough detergent was
dispensed
Use more detergent, or change
your detergent.
Items are blocking the movement
of the spray arms.
Rearrange the items so that the
spray can rotate freely.
The filter combination is not clean
or is not correctly fitted in the base
of wash cabinet.
This may cause the spray arm jets
to get blocked.
Clean and fit the filter correctly.
Clean the spray arm jets.
Cloudiness on glassware.
Combination of soft water and too
much detergent.
Use less detergent if you have soft
water and select a shorter cycle
to wash the glassware and to get
them clean.
White spots appear on dishes and
glasses.
Hard water area
can cause limescale deposits.
Add more detergent.
Black or grey marks on dishes
Aluminum utensils have rubbed
against dishes
Use a mild abrasive cleaner to
eliminate those marks.
Detergent left in dispenser
Dishes block detergent dispenser
Re-loading the dishes properly.
The dishes aren't drying
Improper loading
Load the dishwasher as suggested
in the directions.
Dishes are removed too soon
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket.
