TI5200 GPU-24
19
3
Operating Procedures
3.16 – Changing Circuit Breaker Switch
1. Place the ON/OFF switch to the OFF position (shown below).
Figure 3.16.1 Circuit Breaker ON
Figure 3.16.2 Switching
Circuit Breaker OFF
Figure 3.16.3 Circuit Breaker OFF
2. Plug the unit into 208 Three Phase 30 amp ac power.
Figure 3.16.4 Plugging Into AC Three Phase Power
3. Place the ON/OFF switch to the ON position (shown below). After 2-3 seconds, the LED bar graph should
illuminate and the fans should begin to operate.
Figure 3.16.5 Circuit Breaker OFF
Figure 3.16.6 Switching
Circuit Breaker ON
Figure 3.16.7 Circuit Breaker ON
4. If the fans and LED bar graph do not operate, check ac outlet for power.
