TI50A DC Power Supply
16
3
Operating Procedures
3.6 – Pre-Operation
Be sure to check that all input and output cables are not damaged. (See Section 5.1)
1.
Check unit carefully for any evidence of damage.
2.
Make sure that airflow is not obstructed from air intake and outlet. (See Section 2.6)
3.
Check that all connections are secure and free from water.
4.
Prior to connecting the TI50A to an ac power source, be sure that the charger is at least 20 feet
5.
away from any fuel source to avoid a potential explosion due to sparking.
The TI50A DC Power Supply is engineered to provide continuous output power. Thus, the charger can be left
connected to a battery until it is ready for use. This is due to the intelligent recharging system that prevents
the TI50A from overcharging the battery.
Figure 3.6.1 - TI50A DC Power Supply
3.7 – Transporting Unit
The TI50A DC Power Supply can be carried for short distances by
hand, but if the area of operation is further than 45 meters (150
feet) it is recommended that the TI50A DC Power Supply should be
transported on a vehicle or in the TI7000-184 Transport Dolly (see
Section 7 Optional Accessories).
TI7000-184 Transport Dolly Dimensions:
16.87” L x 14.5” W x 49.25” H
428.50 mm x 368.30 mm x 1250.95 mm
Weight:
18.5 lbs (8.39 kg)
Figure 3.8.1 TI7000-184
Transport Dolly
