
TI3000 GPU-24-INV-1800
25
3
Operating Procedures
3.22 - Control Panel and LCD Display
The Pure Sine Wave Inverter is equipped with a Control Panel that displays operational information so you
can monitor the status of the inverter and the GPU’s power cells. A backlit LCD display shows both input
voltage and current from the power cells. Actual output power (in watts) from the inverter will be displayed
when equipment is plugged into the power outlet. In figure 3.22.1, the inverter has an input voltage of 25.0V
with a current draw of 71A. The resulting output power is displayed on an analog bar and reads 1500W.
NOTE
!
When activated, the power outlet will operate with or without
ac power attached.
3.23 - Sine Wave Powersave Mode
The Sine Wave Inverter has a built-in “Powersave” mode to reduce the drain on the power cells when no load
is present. This mode (when enabled) checks the output for a load every 2.5 seconds and will automatically
power up with a load of at least 10 watts. To enable/disable this feature, set the Inverter Power Switch to
“O” and then “I”. When the “PWR SAVE” screen comes up, quickly set the power switch to “O”, wait three
seconds, and set the switch to “I”. This will toggle the “Powersave” function on and off.
Figure 3.22.1