TI28000-654 Reel
6
3
Operation Procedures
3.2 – Mounting Procedures
Ensure that mounting surface is flat and structurally sound to prevent binding on reel and after it is mounted.
Position reel to mounting surface and secure into place, using four secure fasteners (not included).
Figure 3.2.1 - Mounting Holes at the base of the Reel
(outlined in blue)
3.3 – Adjust Reel Drag
You can control the tension of the turning of the reel, by adjusting the reel drag. Turning clockwise will tighten
to create more drag. Tightening all way will lock the cylinder in place. Turning counter-clockwise will loosen.
(see figure 3.3.1)
Figure 3.3.1 - Crank to adjust the reel drag.
3.4 – Unit Care
Protect the cables from damage. Do not cut or crush the cables when handling the unit. Always inspect
cables prior to use. If no damage is evident, proceed to the next step.
Avoid prolonged exposure to extremely damp environments. Keep unit clean and guard from moisture when
not in use.
Keep an eye on foreign objects when reeling in and out line cords during use.
