
TI2500 GPU-24
10
2
Product Overview
NOTE
Do not overtighten Selector Shield screws. Be sure star locks are on
screws and snug the screw. Overtightening will damage the Selector
Shield.
!
2.11 – DC Output Connectors
The 24 Vdc Output Connector is a circular
style receptacle. The 24 Vdc Plugs (See
Figure 2.11.1 below) connect to the DC
Output Connectors and are secured via
threaded ring. Each output provides 28.5 Vdc
regulated at up 25 amps. 28.5 Vdc at up to
50 amps is possible when using the Y-cable
connector TI2000-071. This cable ties both
25 amp DC Connectors together to get one
output capable of 50 amps of continuous dc
power and 92 amp hours of rechargeable
battery power.
Figure 2.11.1 - 24 Vdc Output Connectors
(outlined in blue)
2.10 – Changing Input Voltage Selector Switch
To change the input voltage from 115 Vac to 230 Vac, simply follow these steps:
With phillips-head screwdriver, remove one screw and rotate the clear protective cover to one side.
1.
Flip the switch to read 230V.
2.
Rotate cover back into place. Replace and tighten screw.
3.
Figure 2.10.1 Unscrew Protective Cover
Figure 2.10.2 Select Voltage
!
The 115 Vac setting accommodates the voltage range of 100-130 Vac.
The 230 Vac setting accommodates the voltage range of 200-260 Vac.
NOTE
CAUTION
!
Do not plug unit into 230 Vac when Input Voltage Selector Switch is
set on 115 Vac.