18
ENG
Step 1
Press
MENU
button and select
INSTALLATION
menu. Select
DVB-S/S2 auto
tuning
and press
OK
button, the screen will show as Fig1, and the default satellite will
be highlighted.
Step 2
Press
OK
button to confirm the selected satellite.
Step 3
Press button to switch to
LNB setting
, press button to highlight
LNB Type
and press
OK
button to set up this parameter.
Step 4
Check if the
22KHz Tone, DiSEqC1.0/1.1
is corresponding to the selected
satellite, if not, highlight and press
OK
button to set up the right parameter. (Refer to Fig 2)
After the above steps are finished, press the blue button to search for channels.
• DVB-T/T2 or DVB-C or ATV Auto Tuning
Select DVB-T/T2 (or DVB-C/ ATV) Auto Tuning to search the programs automatically Before
searching, you may need to select the country or set up the scan menu. If you want to stop
the auto search, press MENU or EXIT button, a exiting dialog is popped out.
•
Press
to confirm exit.
•
Press
to continue searching.
DVB-T/T2 or DVB-C Manual Tuning
Search and store programs manually, first select the corresponding source before starting
search.
1. In
Installation
menu, select
DVB-T/T2 (or DVB-C) manual tuning
and press OK to access
the searching interface, first select the country.
2. Second press
or
to set up relevant parameters such as scan mode, scan scope etc.,
and then select
Search
and press or to start the search.
3. The search stops when a program is found and this program will be stored in the current
channel position. If you want to stop the search, press
MENU
button.
Fig. 2
