Tesla MODEL Y 2012, Руководство пользователя

Страница: 79 / 263

2. Remove the cover located under the dashboard in
the driver’s side footwell.
3. Peel back the carpet to expose the vehicle's 4-pin
connector on the wiring harness.
4. Connect the pigtail connector to the vehicle wiring
connector.
WARNING: Towing increases your stopping
distance, even when the trailer is equipped with its
own braking system. When towing, increase your
following distance and avoid situations that could
potentially cause heavy braking. Failure to do so
can cause a collision.
WARNING: Observe all regulations and legal
requirements in your regional and national
jurisdictions that apply specifically to trailer towing
and brake requirements. Many regions require a
breakaway switch, located on the tongue of the
trailer, to activate the trailer brakes in the event
that the trailer separates from the vehicle. Failure
to comply with regulations can compromise your
safety.
WARNING: Follow the instructions provided by the
trailer brake manufacturer to ensure that trailer
brakes are properly installed, adjusted, and
maintained. Tesla is not responsible for damages
caused by incorrect installation of trailer braking
systems.
Parking with a Trailer
Whenever possible, avoid parking on a grade. However,
if parking on a grade is absolutely necessary, place
wheel chocks under the trailer wheels. Consider having
someone help you with these steps:
1. One person presses and holds the brake pedal.
2. A second person places the wheel chocks under the
wheels on the downgrade side of the vehicle's tires.
3. When the chocks are in place, release the brake pedal
and ensure the chocks hold the weight of the vehicle
and trailer.
NOTE: When testing chocks, ensure that Vehicle Hold
(see Vehicle Hold on page 68 ) is not engaged. If
Vehicle Hold is braking Model Y, the Vehicle Hold
indicator light displays on the touchscreen. To
disengage Vehicle Hold, press and release the brake
pedal.
4. Place the vehicle in Park.
WARNING: If parking on a grade is necessary,
always ensure that all trailer wheels have been
securely chocked. Failure to do so can result in
serious damage or injury.
Trailer Sway Mitigation
When trailer sway is detected, the electronic stability
control system attempts to apply the appropriate
amount of braking to minimize trailer sway. The
touchscreen briefly displays the traction control system
indicator. Pressing the brake pedal when the system is
actively braking to mitigate trailer sway does not cancel
this automatic braking.
Attaching and Removing the Ball
Mount
The Model Y towing package does not include a ball
mount. You must purchase a ball mount suitable for the
type of trailer you are towing. The Model Y hitch receiver
supports a ball mount with a length of up to 22 cmand a
rise of up to 2 cm. Do not use any type of drop ball
mount that does not meet these requirements.
Towing and Accessories
77 Driving