Tesla MODEL Y 2012, Руководство пользователя

Страница: 11 / 263

Instructions for changing the battery are provided in
Replacing the Key Fob Battery on page 9 .
NOTE: You can use the same key fob with multiple
Model Y vehicles provided you authenticate it (see
Managing Keys on page 10 ). However, key fob works
with only one Model Y at a time. Therefore, to use a key
fob for a different Model Y, touch its flat side against the
card reader on the driver's side door pillar.
NOTE: Model Y supports up to four different key fobs.
CAUTION: Protect the key from impact, high
temperatures, and damage from liquids. Avoid
contact with solvents, waxes, and abrasive
cleaners.
Passive Locking and Unlocking
Locking and unlocking Model Y with your key fob is
conveniently hands-free. Although you must be carrying
a paired key fob, there is no need to use it. Model Y has
sensors around the vehicle that can recognize the
presence of a key fob within a range of approximately
two meters. Therefore, you can keep your key fob in
your pocket or purse and simply pull on the door handle
to unlock. When carrying your key fob with you, you can
also open the trunk without having to use the key by
pressing the liftgate's exterior door handle. If Walk-Away
Door Lock is enabled, Model Y automatically locks when
you exit and the key fob is no longer in range (see Walk-
Away Door Lock on page 12 ). Passive locking and
unlocking is automatically enabled when you pair your
key fob to Model Y.
Although you can use the same key fob with multiple
vehicles, it can only be paired to one vehicle at a time.
To activate a paired key fob to a different vehicle, touch
the flat side onto the driver's side door pillar and click
any button on the key fob to confirm.
NOTE: For increased security, passive locking and
unlocking disables after being stationary for five minutes
while within vehicle range when the vehicle is not in use
(for example, you are standing outside your vehicle). In
this situation, you must shake or press a button on the
key fob to re-enable passive locking and unlocking.
Replacing the Key Fob Battery
Under normal use, the accessory key fob has a battery
that lasts for up to one year, depending on key fob
version and selected vehicle settings. When the battery
is low, a message displays on the touchscreen.
To replace the key fob battery:
1. With the key fob placed button side down on a soft
surface, release the bottom cover, using a small flat-
bladed tool.
2. Remove the battery by lifting it away from the
retaining clips.
3. While avoiding touching the battery's flat surfaces,
insert the new battery (type CR2032 ) with the ‘ + ’
side facing up.
NOTE: Wipe the battery clean before fitting and
avoid touching the battery's flat surfaces. Finger
marks on the flat surfaces of the battery can reduce
battery life.
NOTE: CR2032 batteries can be purchased from any
retailer that sells batteries.
4. Holding the bottom cover at an angle, align the tabs
on the cover with the corresponding slots on the key
fob, then press the cover firmly onto the key fob until
it snaps into place.
5. Test that the key fob works by unlocking and locking
Model Y.
Keys
9 Opening and Closing