manualshive.com logo in svg

Tesla Gen 3, Руководство пользователя, Страница: 3 / 42

Поделиться
Скачать
Tesla Gen 3 Скачать руководство пользователя страница 3

IMPORTANT SAFETY INFORMATION

Read all instructions before using this product. Save these instructions. Wall Connector features built-in RCD 
Type A + DC 6mA.

This manual contains important instructions for the Tesla Gen 3 Wall Connector that shall be followed during 
installation, operation, and maintenance. Please review all warnings and cautions before installing and using 
the Wall Connector.

WARNING: 

When using electric products, basic precautions should always be followed, including the 

following.

INSTRUCTIONS RELATING TO RISK OF FIRE OR ELECTRIC SHOCK

WARNING: 

Do not install or use the Wall Connector near flammable, explosive, harsh, or combustible 

materials, chemicals, or vapors.

WARNING: 

Turn off power at the circuit breaker before installing or cleaning the Wall Connector.

WARNINGS

WARNING: 

This device should be supervised when used around children.

WARNING: 

The Wall Connector must be earthed through a permanent wiring system or an equipment-

earthing conductor.

WARNING: 

Use the Wall Connector only within the specified operating parameters.

WARNING: 

Never spray water or any other liquid directly at the wall mounted control box. Never spray 

any liquid onto the charge handle or submerge the charge handle in liquid. Store the charge handle in 
the dock to prevent unnecessary exposure to contamination or moisture.

WARNING: 

Do not use the Wall Connector if it is defective, appears cracked, frayed, broken, or 

otherwise damaged, or fails to operate.

WARNING: 

Do not use the Wall Connector if the flexible power cord or cable is frayed, broken, or 

otherwise damaged, or fails to operate.

WARNING: 

Do not attempt to disassemble, repair, tamper with, or modify the Wall Connector. The Wall 

Connector is not user serviceable. Contact Tesla for any repairs or modification.

WARNING: 

When transporting the Wall Connector, handle with care. Do not subject it to strong force 

or impact or pull, twist, tangle, drag, or step on the Wall Connector, to prevent damage to it or any 
components.

WARNING: 

Do not touch the Wall Connector’s end terminals with fingers or sharp metallic objects, 

such as wire, tools, or needles.

WARNING: 

Do not insert fingers or foreign objects into any part of the Wall Connector.

WARNING: 

Do not forcefully fold or apply pressure to any part of the Wall Connector or damage it with 

sharp objects.

WARNING: 

Use of the Wall Connector may affect or impair the operation of any medical or implantable 

electronic devices, such as an implantable cardiac pacemaker or an implantable cardioverter 
defibrillator. Check with your electronic device manufacturer concerning the effects that charging may 
have on such electronic devices before using the Wall Connector.

2

Gen 3 Wall Connector Manual 

Содержание Gen 3











































Отзывы:

Нет отзывов