Setting Button] button for 3 seconds to enter the clock setting and the HH part will flash. Press
F
[Left]
and [Right] to set the clock. Press
D
[Time/Delay Button] again to switch to minute setting and MM part
will flash, press
F
[Left] and [Right] button to set minutes. Confirm the set time by pressing
D
[Time/Delay Setting Button] and the setting will be saved.
DELAY
If you do not want the appliance to start working immediately, set a delay for it to start. Press any
button on the control panel to switch the appliance from standby mode. In the operation mode, press
the
D
[Time/Delay button] for 1 second, the
A
[Delay] symbol will light up and the HH part will flash,
press the
F
[Left] and [Right] button to set the hour. Press
D
[Time/Delay Button] again to switch to
minute setting and MM part will flash, press
F
[Left] and [Right] button to set the minute. Press the G
button [ Coffee start button ] and the appliance switches to standby mode. The correct delay setting is
indicated by flashing the
A
[Delay] symbol on the control panel, and the display will alternate between
the current time and the set delay time. If set correctly, the appliance will start its own coffee
preparation at the set delay time, according to the last set selection of the degree of coarseness of the
coffee grind or the set use of ground coffee.
To cancel the set timer, press the
G button
[ Coffee start/stop button ]. The appliance switches to
operating mode and the set delay is switched off. If you do not start the coffee preparation process
within 60 seconds, it will automatically switch to standby mode after 60 seconds.
PROTECTION MODE
If the top lid of the appliance is open, it is not possible to use it.
APPLIANCE PROTECTION
If the grinder motor runs continuously 5 times with an interval of less than 1 minute between each
grind, or if the appliance overheats, the safety fuse/thermal safety fuse will activate. Unplug the
appliance from the mains and let it cool down.
The appliance is equipped with protection to prevent it from restarting after the coffee preparation is
complete. Open the Upper lid
6
, clean the grinder and filters, insert coffee beans or ground coffee, add
water to the Water Tank and close the Upper lid.
If you press the
G button
[ Coffee start/stop button ] during coffee preparation, the coffee preparation
will be stopped. To restart, it is necessary to open the top lid
6
, add water and replace the coffee. Close
the top lid and start a new coffee preparation process.
If you do not use the appliance for a long time, disconnect it from the mains.
CLEANING INSTRUCTIONS
Clean the appliance after each use and before storage. Before cleaning, unplug the appliance and
let it cool down completely.
After each use, clean all removable parts such as the inner cover, brewing basket, water tank, etc.
with warm water and a small brush on one end of the spoon.
Push the anti-drip valve up 3-4 times to empty the residual water.
Wipe the exterior of the product with a soft, damp cloth to remove stains.
Drops of water may accumulate in the area above the brewing basket and drip onto the base of
the product during cooking. To control drips, wipe the area with a clean, dry cloth after each use of
the product.
Wipe the heating plate with a damp cloth, do not clean it with an abrasive cleaning agent.
Clean the appliance if there is excessive leaching of grease. The small oil droplets on the surface
Содержание CFMTES400
Страница 1: ...TESLA CoffeeMaster ES400...