Tesla 32M320BH, Быстрый старт

Страница: 9 / 40

9
ENG
HELP
Problem Solution
No Power • Check the AC cord of TV is plus in or not. If still no power, please pull out
the plug and replug in after 60 seconds. And open the TV again
Signal receive not properly • To cause double image or phantom if there has high building or high
mountain round TV. You can adjust image effect by manually operation:
consult instruction of vernier regulation or change the direction of
external antenna.
• If you use the indoor antenna, under certain circumstance, receive will be
more difficult .So you can change the direction of the antenna to adjust
the image effect . If can’t change image receiving effect either , you have
to use external antenna.
No picture • Check the antenna at the back of TV is connected properly or not.
• Try to select other channels and check whether the TV problem itself or
not
Video is ok without audio • Increase the volume.
• Check the TV is in mute mode or not , and please press the mute button
to make sound resume.
Audio is ok color error or no
picture
• Increase contrast and brightness.
Snow statics picture and noise • Check the antenna at the back of TV is connected or not.
Level broken line • Vacuum, such as hair drier, Maybe has electrical appliance interfere.
Please turn off these kinds of electrical appliance, cleaner and so on.
Image or-Dual “simulacrum” The
TV no response with the Remote
• Perhaps the location for the antenna is not good.Use the tall beamed
antenna can be improved quality of the display image.
• Operate the remote direct to the remote sensor on the TV.If still no
response for the TV, please check if the plastic bag on the remote take or
not. And check if the location for the battery is correct.Change the new
battery.
• The TV will shift to the STAND BY if no response from the remote in the
few minutes.
NO Video In (PC Mode) • Please check if the display cable connect to the VGA correcte.
• Please check if there has the bend on the display cabIe
Vertical twinkling (PC Mode} • Enter the main menu . Use the clock regulator for the video display noise
to eliminate the vertical line.
Horizontal ripping (PC Mode) • Adjust the Audio sound horizontal in the main menu to clear the
horizontal ripping line.
The screen is too bright or too
dark (PC Mode}
• Adjust the contrast ratio or brightness in the main menu.
PC Function no response • Check the computer setting in the state of compatible display resolution
Ripping line in RCA connecting • Please use good quality connecting cable.
Problem still exist • Unplug the power cable and wait for 30 seconds, then connect. If there
is some problem with our TV, do not repair it by yourself, please contact
with the customer service canter.
There will be complete picture and the brightness wi ll come down if the TV is in Note. So please do not kee p
the TV in a state of same, the static picture for too long time. Menu or same picture that has much difference in
brightness and contrast ratio for too long time.
Note : TV panel is built with very high precision technology giving you fine picture details in vibrant color.
Occasionally, a few non-active pixels may appear on the screen as fixed point of red,green,blue or white. Please
note this does not affect the performance of the product.