Tescom Nobby TMV1500AU Скачать руководство пользователя страница 30

29

2

Warning

Specifications

Troubleshooting

Please check the following, and if a problem still persists, please stop operation 

immediately.

When

Handling method

Probable causes

Even if you push the button, 

the product doesn’t operate.
The product has stopped 

operation. (The power lamp 

is blinking.)

Ice is stuck between the parts.

Please remove any ice stuck between the 

parts.

The product has been operating 

for more than the rated time.
The safety mechanism became 

engaged due to a rise in 

temperature.

Please allow it to rest for more than 30 

minutes.

Please handle the unit following the 

procedures shown on pp.27–28.

You cannot turn the power ON.

The power plug has been mistakenly 

pulled out from the outlet.

Please re-insert the power plug into the outlet.

Water leakage occurs.

The blender container and the 

container base are not firmly 

connected.

A seal is mounted incorrectly.

Please tighten these completely until the 

water leakage stops.
Please assemble them again.
Please see pp.9–10.

Even if you push the Vacuum 

Blender button, the product 

doesn’t operate.

After blending by pushing the Pulse 

button and the ON button, you 

accidentally pushed the Vacuum 

Blender button. (The protective 

function began operating.)

Please perform processing using the 

blender function. (Please see p.16.)

Smoke appears.
The cord has twisted and won’t go back to its 

original state.

Please stop operation immediately.

Even if you push the button, the product doesn’t operate.
The product has stopped operation. (The error notification 

lamp is lit.)

TMV1500AU

Product number

220–240 V

〜  

50–60 Hz

Power source

300 W

Power consumption

9,500 rpm

Rotating speed

Blender container: Max. 780 ml, min. 200 ml
Smoothie container: Max. 780 ml

Container 

capacity

Vacuum blender

Name of product

Main body: 2.2 kg
Blender container and 
container base: About 1.5 kg
Smoothie container: 340 g

Weight

H327 x W148 x D275 (mm)

Size

1.2m

Length of cord

Precautions

Please do not handle the power cord in any of the 
following ways.

This appliance is not intended for use by persons
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning use of the 
appliance by a person responsible for their safety.
Children should be supervised to ensure that they 
do not play with the appliance.

Otherwise, fire or electrical shock may occur.

Bending it forcedly
Twisting it
Pulling it
Putting heavy items on it
Putting it close to a hot item
Tucking it
Making alterations to it
Using it while having it tied in a bundle

These conditions may cause fire, 

electrical shock, burns, or a short circuit.

Please do not use the product under any of the 
following states, as the power cord may be 
broken due to long-term use or improper use.

When, during use, the product sometimes works and 
sometimes doesn’t
When the power cord is twisted and won’t return to its 
original state
When the base of the power cord has been deformed 
or damaged
When the connection of the plug to the outlet is loose

This appliance shall not be 
used by children. Keep the 
appliance and its cord out 
of reach of children.
Or, please do not use the 
product while children are 
nearby.

Doing so may cause them 

injury.

Please do not use the product with power other 
than AC 220-240 V.

Otherwise, fire may result.

Please do not leave the plastic bag packaging 
within reach of infants or children.

Doing so may allow them to mistakenly put the bag 

over their heads, possibly causing suffocation, etc.

Please do not leave the power plug cover within 
reach of infants.

Doing so may cause accident by swallowing.

The disassembly, repair, 
or alteration of the 
product should only be 
done by a repair engineer.

Otherwise, fire or 

electrical shock may 

occur.

If the power cord is 

damaged, it must be 

replaced by the 

manufacturer, its service 

agent, or similarly 

qualified persons in order 

to avoid a hazard.

Please do not submerge the 
main body in water.
Please do not allow water to 
come into contact with the 
main body.
Please do not plug and 
unplug the power cord with 
wet hands.

Doing so may cause 

electrical shock.

Prohibition

Prohibition

Prohibition 

of 

disassembly

Prohibition 

of use in 

wet areas

Содержание Nobby TMV1500AU

































Отзывы: