21
10
Point to note:
Point to note:
Point to note:
Point to note:
Rotating
Stand it
upright.
While
pulling
Flip the cover
valve to dismount
the cover.
Cover valve
Blender container
Blender container seal
Container base
Blender cover
Lip
Smoothie
container
unit
Lighting off
Release lever
Using the vacuum storage function
Using the blender
2
Attach the blender container to the container base.
3
Put the ingredients in the blender container, and
then put the blender cover on.
(1) Fit the blender container seal into the
inner groove of the container base.
(2) Fit the blender container into the
container base, and attach it by rotating
it in the direction of the arrow.
(1) Match the shapes of the blender
container and the blender cover.
Fear of injury
Please be careful not to
touch the blade.
* Please do not cover up the hole in the center,
as air needs to pass through the hole.
(2) Fit the blender cover onto the blender container.
(1) Place it on a stable area, such as a table.
(2) Allow air into the smoothie container by
flipping the cover valve with your finger.
(3) Dismount the cover while firmly holding the
smoothie container.
6
Store the container in a refrigerator.
Please store the smoothie container upright.
Depending on the combination of ingredients, the food
may separate during storage.
(3) Remove the smoothie container unit.
* Please be careful not to hit the vacuumizing
arm.
(4) After using the smoothie container,
pull the plug out from the outlet.
The cover may be hard to dismount because the
container interior is decompressed. When you drink
a smoothie, etc., from the container, please dismount
the cover following the procedures below.
Tighten firmly.
Push in both ends of the blender
cover so that it does not slant.
Please seal the
lip completely.
5
Remove the smoothie container unit
from the main body.
(1) Push the Power button to turn the power
OFF after you hear the beeps.
You will hear a “whooshing” sound.
(2) While pulling the release lever,
stand the vacuumizing arm
upright.
