Tescom Nobby NTE10, Руководство пользователя, Страница: 4 / 32

①
②
Names and Functions of Parts
[Normal Use]
Off: Charge remaining
Blinking: Low charge
[While Charging]
On: Charging
Off: Charging complete
Do not put objects
in here.
Do not put objects in here.
Main Body Socket
Power Adapter Cap
■Accessories
Pushing the switch
t u r n s i t O N a n d
cause s t he C o ol
Facial Care power
light to blink. Push-
ing again turns it
OFF and turns off
t h e C o o l F a c i a l
Care power light.
Pushing the LED
Switch while the
Cool Switch is on
will switch to LED
Care and turn off
t h e C o o l F a c i a l
Care power light.
Place on the skin
and use for Cool
Facial Care.
Blinks when the Cool
Switch is pushed, and
becomes solid when
cooling preparation is
complete.
When the switch is
pushed , i t tur ns
ON and t he L ED
H e a d b l i n k i n g
pattern begins.
Push again to turn
OFF and the LED
Head turns off.
If the Cool Switch
is pushed while in
use, the LED Head
will turn off and it
will switch to Cool
Facial Care.
Place on the skin
and use for LED
Care.
* Follow regional laws when disposing of this product.
How to Charge
W a r n i n g
● Once charging is complete, remove the power adapter from the outlet.
● Use with an ambient temperature between 10 and 40°
C.
1
Confirm the Cool Switch and LED
Switch are OFF, and connect the
power adapter to the main unit and
outlet.
●
Pushing the unit-side plug of the power adapter
too hard or forcefully bending it can damage the
unit socket.
2
When the Battery Light turns off,
unplug the power adapter from the
main unit and outlet.
●
The average charging time is approximately 5
hours.
●
While charging, the main unit and power adapter
may become warm, but this is not a malfunction.
●
One charge allows for use of approximately 5
sets. (1 set: 5 minutes of LED Care and 5
minutes of Cool Facial Care)
(Based on factors such as conditions of use and
maintenance, the number of sets may decrease)
①
②
Battery Light
On: Charging
Off: Charging
complete
Cool Head
Cool Switch
Battery Light
Air Intake
LED Head
LED Switch
Air Exhaust
Cool Facial Care
Power Light
Power Cord
Unit-side Plug
Power Plug
Nickel Metal
Hydride Battery
(Internal)
The Battery Light will turn on while charging,
and turn off when charging is complete.
When the operating time after charging becomes extremely short, the following
procedure can refresh the battery and improve operating time.
１．Push both the Cool Switch and LED Switch simultaneously for over 10 seconds.
When the Cool Facial Care power light and Battery Light start blinking, stop
pushing theswitches. Let the charge run out until the lights turn off.
２．Charge as normal.
How to Have a Long-lasting Nickel Metal Hydride Battery
●
When storing the product, fully charge it before storage.
●
When not using for a long time, charge periodically every six months.
3 4