Tescom DS300 Series, Руководство пользователя

Страница: 7 / 54

4
Basic Features:
•
PWM and IGBT technology
•
Pure sinusoidal output wave form and true on-line topology
•
High input power factor (IGBT rectifier), Input current limiting
•
Low input current THD (IGBT rectifier)
•
Low output voltage THD
•
High AC/AC and DC/AC efficiency (up to 94%)
•
3 separate DSP (Digital Signal Processor) control
•
Cold-start feature
•
Static By-Pass feature: Provides uninterruptable transfer to bypass source in case of
overload or UPS fault.
•
Bypass leakage current sense system
•
Maintenance bypass switch and warning system, by-pass short circuit protection
•
Separate bypass input facility (split bypass), generator operation sense input
•
LCD alphanumeric display panel providing battery, load, voltage, power and status
information in detail to user
•
Improved diagnostics and correct fault infor mation
•
Up to 192 event memory record system (7000 alarms or warnings total)
•
Real time clock and calendar system
•
Overload operation 10 minutes at 100% - 125% load, 1 minute at 125% - 150% load
•
Output overload, over-current and short circuit protection, output current limiting
•
Reliable operation at even 100% unbalanced load condition
•
Non-linear load supply feature (CF 3:1)
•
Double polarity battery (with common terminal)
•
Automatic and manual battery test and battery temperature compensation features
•
3 separate maintenance clock counters
•
Battery charge with current limiting
•
Automatic and manual boost charge feature
•
Battery deep discharge protection
•
Temperature protection with 3 separate sensors
•
Interactive communication
•
Diagnostic and settings with PC ability
•
2 separate RS232 communication ports (standard)
•
Multi UPS monitoring on same communication line by RS485 (optional)
•
4 dry contact alarm relay outputs as standard (8 optional relay outputs)
•
Improved remote monitoring panel system (optional)
•
RS232 port multiplexer (optional)
•
Direct network connection with optional SNMP support
•
MODBUS Adapter (optional)
•
AT command set definitions for dump modems
•
Communication via Windows based T-MON software and remote monitoring and control of
UPS via modem
•
Optional softwares compatible for most computer platforms
•
Ability for labeling of UPSs by users
•
Emergency power-off support
•
Conformity to international and local standards
•
AC input and output filters
•
Optional graphic front panel
•
CE compliance
•
Input, bypass and load phase order protection
•
Optional leakage current alarm system
•
Input and output isolation transformers (optional)
•
Enhanced accessory options
•
100.000 hours MTBF
•
2 years system warranty
•
10 years spare parts warranty