TBBL14
EN
5
Continuous (Normal) Operation
Select the desired operating speed. There are two
•
speeds. Move the Selector knob to the right to increase
the speed. When you start blending use the low
speed to begin with and select the high speed only
if necessary.
To stop the operation, turn the knob back to ‘0’.
•
Pulse Mode
Use this mode where ingredients need to be blended in
small repeated bursts.
Set the Selector to ‘0’. Press the Selector knob and
•
hold it there for a short period. To stop the operation,
release the knob.
Note: Do not run the appliance continuously for more than
3 minutes. After a full 3 minute cycle allow the blender to
rest for another 5 minutes before using it again.
During blending:
You can feed in small amounts of food or liquid through
•
the jug lid.
To do this:
Turn the stopper slightly to free it and lift it out.
•
Gradually feed pieces of food or liquids into the jug
•
through the feeder.
Replace the stopper when you have finished.
•
OPERATION
Make sure the jug and the lid are secure and locked.
•
Set the selector switch to ‘0’
•
Plug your blender into the mains and switch on the
•
power.
Operating Modes
