Tesco KENNY, Инструкция по эксплуатации

Страница: 8 / 28

2
Before you start
Produced in China for TESCO Stores Ltd.
© Tesco 2011.
www.tesco.com
Warnings
Important: Retain these instructions for future reference.
Unwrap all packaging materials and place the components on top
of the carton box or on a clean floor to prevent it from scratching.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
This product is intended for a maximum weight of 100 kg. Do not
exceed this weight.
Do’s
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for
assembly.
Check the pack and make sure you have all the parts listed.
Tools not included.
Due to the size of this product we recommend that it is assembled
in the room intended for use.
Ensure that this product is fully assembled as illustrated before use.
Make sure the legs remain in contact with the ground.
Check all screws or bolts are tightened and inspect regularly.
To clean wipe with a sponge and warm soapy water. Do not
use solvent based cleaners or detergents as they can bleach
or damage the product.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Dont’s
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not overtighten screws or bolts.
Do not stand on the product.
Do not use this product if parts are missing, damaged or worn.
Do not allow children to jump on the bed as this could cause
damage to the frame.
Never use scourers, abrasives or chemical cleaners.
Number of people required to assemble
Two people to assemble the product and two people to lift the
product into position.
Time to assemble
1 hour
Tradesman’s tips
“Hi, look out for me throughout this manual. Wherever you see
my picture I will have a handy tip to help you with the assembly
of your product”.
My first tip is: “Before you start get a cup of tea, sit down and
read through these instructions carefully”.
And for good measure my second tip is that you will need the
following tools to assemble this product, so gather them to hand
before you start
Tools required
5 Hex key
supplied
supplied
Kenny Double Bedframe
Assembly instructions