Instruction Manual for TESA TWIN-SURF
14
Parameters enabled for displaying are marked with the icon
while those that are not
enabled are marked with the icon
.
To access the parameters options setting screen, move to the desired parameters using the
button
then confirm by pressing
.
The following screen appear.
1. To enable / disable the parameters, go to the icon
with button
then
press
.
2. To enable / disable tolerance, go to check box
Tol
with button
and press
to enable the tolerance.
3.
Set the tolerances values
:
Upper tolerance is the first value. Lower tolerance is the second value. Move on the
desired digit with the button
and press
to set the wished value.
4. When finished, press
to go back to the
Parameters
screen.
If a code has already been selected, no parameter modification is available.
If you want to modify the parameters displayed with your code, proceed to
the code modification only through TESA DATA-STUDIO.
Содержание TWIN-SURF
Страница 29: ...Instruction Manual for TESA TWIN SURF 29 ...
