TESA TESATRONIC TT20, Инструкция по эксплуатации

Страница: 68 / 86

67
RANGE
UNIT
HOLD
RANGE
measuring range resolution measuring range resolution
1 ± 5000 µm 200 µm ± .200 in .010 in
2 ± 2000 µm 100 µm ± .100 in .005 in
3 ± 500 µm 20 µm ± .020 in .001 in
4 ± 200 µm 10 µm ± .010 in .0005 in
5 ± 50 µm 2 µm ± .002 in .0001 in
6 ± 20 µm 1 µm ± .001 in .00005 in
7 ± 5 µm 0.2 µm ± .0002 in .00001 in
8 Auto Range Auto Range
6.3 Analogue measuring ranges
The instruments TT20 and TT60 are equipped with 7 fixed analogue measuring ranges an
one automatic analogue range.
6.4 UNIT
The instruments may work either in metric units or as inch units. The conversion is instant
without any effect on the measurement.
UNIT
UNIT
1035.8 µm .040780 in
UNIT
6.5 MEASUREMENT Mode; HOLD Mode «HOLD»
To enable all measurement modes, the instruments can permanently display the measured
value «Measurement Mode» or hold the value in a desired position «Hold Mode».
Changes from continu-
ous measurement mode
into hold mode, the sign
«HOLD» is displayed.
Example :
Each key push
changes the display range.
Range Metric (µm) Inch (in)
Change measuring unit on analogue as also
on numerical display.
Example :
HOLD