TES IEC-22A2, Руководство пользователя

Страница: 16 / 28

15
|
2.1 About VESA Mount
The IEC-22A2 series conform to the “VESA Flat Display Mounting Interface Standard”
which defines a physical mounting interface for touch computer, and corresponding with
the standards of touch computer mounting devices, such as wall-mounted. The VESA
mount is located on the back of this unit.
The equipment is only for wall mounting for horizontal (output connector facing down)
and vertical mounting orientations (output connector facing left or right) when EUT
without base. The equipment with base used for horizontal (output connector facing
down) and panel facing up position.
VESA Mount
!
Warning!
Please select the TES original screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm. Please use four M4 / 8 mm screws diameter with proper length to
mount your monitor.
Note: The mounting stand must be able to support at least 7.67 lbs (3.48 Kg).