Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 84 / 204

Rocker
The rocker determines the position and movement of the bioreactor throughout a task. When the
system is in an idle state, the bioreactor is in the home position of 0°, as shown in Figure 6-5.
Figure 6-5: Bioreactor in the home position
1 EC inlet and EC outlet ports facing upward
2
Sample port facing downward
The rocker has two settings: In Motion or Stationary. The bioreactor range of motion is from
−180° to 270°. A negative value, such as −10°, means that the bioreactor moves clockwise, whereas a
positive value, such as 20°, means that the bioreactor moves counter-clockwise.
In Motion
The In Motion rocker setting includes three values: the start position of the bioreactor, the end position
of the bioreactor, and the dwell time. The start and end positions indicate the number of degrees from
the home position of 0°, and both positions must fall within the range of −180° to 270°. The bioreactor
moves back and forth between the start and end positions for the duration of the task or a step of a task.
The dwell time indicates how long the system rests at the start and end positions. The dwell time range is
0 to 3600 sec. The following example shows how this operator's manual denotes In Motion as the rocker
setting:
In Motion (−90°, 180°, 1 sec)
Selecting In Motion as the Rocker Setting
The following instructions explain how to select In Motion as the rocker setting for a task or a step of a
task. For information about using the data entry pad, see “Using the Data Entry Pad” on page 3-21.
From the Setup screen:
1. Touch
Rocker
.
The Setup: Rocker window opens, as shown in Figure 6-6.
Rocker
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 6-11