Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 30 / 204

Sensors and Fluid Detectors
There are four sensors and three fluid detectors located on the mounting plate, as shown in Figure 2-7.
Table 2-7 describes the function of each sensor and each fluid detector.
Figure 2-7: Location of the sensors and the fluid detectors
Table 2-7: Function of the sensors and the fluid detectors
Location Component Function
1 EC outlet pressure sensor Measures the fluid pressure in the EC circulation loop.
2 EC inlet pressure sensor Measures the fluid pressure in the EC circulation loop.
3 IC inlet pressure sensor Measures the fluid pressure in the IC circulation loop.
4 IC outlet pressure sensor Measures the fluid pressure in the IC circulation loop.
5 IC low
‑
level fluid detector Detects the fluid level in the ARC at the low
‑
level limit.
6 IC high
‑
level fluid detector Detects the fluid level in the ARC at the high
‑
level limit.
7 EC fluid detector Detects the presence of fluid in the EC inlet line.
Quantum System Components
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 2-11