Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 28 / 204

Valves
There are 11 valves located on the mounting plate, as shown in Figure 2-6. Table 2-6 describes the
function of each valve.
Figure 2-6: Location of the valves
Table 2-6: Function of the valves
Location Component Function
1 Air removal valve Allows air into the ARC.
2 EC media valve Controls the flow of fluid from the EC media line into the system.
3 IC media valve Controls the flow of fluid from the IC media line into the system.
4 Cell valve Controls the flow of fluid from the cell line into the IC inlet line and
subsequently into the IC circulation loop via the ARC.
5 Wash valve Controls the flow of fluid from the wash line into the system.
6 Distribution valve Controls the flow of fluid between the IC inlet line and the EC inlet
line. Does not allow the flow of fluid from the cell line to the EC inlet
line.
7 Reagent valve Controls the flow of fluid from the reagent line into the system.
Quantum System Components
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 2-9