Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 194 / 204

The Quantum system is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. Based on immunity test data, it is unlikely that commonly used
communication devices such as cell phones or WiFi or Bluetooth equipped devices meeting 802.11g/n
will adversely affect the Quantum system.
However, if interference is noticed or higher powered devices such as two-way radios are to be used in the
vicinity of the Quantum system, the customer or the user of the Quantum system can help prevent
electromagnetic interference. Electromagnetic interference can be prevented by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the
Quantum system as recommended in Table 17-9, according to the frequency and maximum output
power specified by the manufacturer of the communications equipment.
Table 17-9: Recommended Separation Distances Between Portable and Mobile RF Communications
Equipment and the Quantum System
Rated maximum output
power of transmitter W
Separation distance according to frequency of transmitter m
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.7 GHz
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects, and people.
System Specifications
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 17-9