Terrier TVK, Руководство пользователя

Страница: 12 / 32

12
6 MAINTENANCE
Check the general condition of the clamp at least once a month, see Chapter 7 - Disassem-
bling/ Assembling. Do not use the clamp if:
- the body is split or deformed, in particular in way of the jaw corners,
- the cam has been visibly deformed,
- the cam teeth are no longer sharp,
- the shackle pins have visibly been deformed,
- any retaining pins are missing,
- the marking on the clamp is no longer legible.
If in doubt consult your supplier.
Depending on the defects noted:
- disassemble and clean the clamp (see Chapter 7 - Disassembling/Assembling) or have the
clamp overhauled by Terrier Lifting Clamps B.V. or another recognized mechanical repair
center (see Chapter 8 - Overhauling).
7 Disassembling / Assembling TVK, TVKH & TVSH Clamps
Important! Before starting disassembling the clamp, mark each part in such a way that they
are easily reassembled in the original position.
Disassembling the TVK
- Remove the retaining pin (5), to which the lock spring (4) is attached, from the frame (1).
- Remove the retaining pins (7), which secure the pivot pin (6) and the frame pin (6).
- Disassemble both pins.
- Remove the cam (3) and the packing gland (2).
Disassembling the TVKH
- Remove the three Allen bolts (5)
- Remove the retaining pins (7)
- Slide both sides apart.
Disassembling the TVSH
- Remove the three Allen bolts
- Remove the retaining pins
- Slide both sides apart.
Reassembling the TVK, the TVKH and the TVSH
When reassembling the clamps, assemble all parts in reverse order. To ensure the safety of
the clamp, only use the original Terrier replacement parts when repairing the clamp. Make
sure they are marked to allow proper identification. If you carry out any inspections, re-
pairs, or modifications yourself, you will nullify all forms of guarantee and product liability.
A ter inspection, repair and/or reassembly, the clamps should be tested using a certified
testing bench.
8 OVERHAUL
At least once a year or in case of any damage to the clamp, the clamp should be inspected,
tested and if necessary overhauled by Terrier Lifting Clamps B.V. or a recognized mechan-
ical repair centre.