TerraWave Solutions
®
3.5 GHz 16 dBi Sector Panel Antenna
with 65-Degree Horizontal Beamwidth and N-Style Jack Connector
Installation Information for T35160P1000665
www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216
I. Tools
Required:
Two 13 mm Box Wrench
II. Installation Diagram:
Pole
Mounting
Assembly
Clamp
Bolt
III. Installation Instructions:
A. Remove the bolts, nuts and washers from the clamp. Push clamp against either side of the pole and
insert bolts. Replace the washers and nuts and tighten.
B. Adjust the angle of the antenna and then tighten the clamps on the pole.
C. Remove the protective cover on the antenna connector and attach cabling. Weatherproofing tape may be
used.
Notes:
- Ensure the antenna is installed in a safe and suitable location and well away from high power lines.
- Do not attempt to install during inclement weather.
- Do not attempt to install the antenna on a pole with a diameter other than 1”-3”.
Antenna
