Introduction
126
RangePro RPX8-P User Manual
N • Breakout Board Connections and Pinouts
Introduction
The RangePro RPX8-P includes a breakout board underneath the airframe, just above the payload area. Con-
nections include 12V power, serial, Ethernet, I2C, SBus, and PWM signals (see
). Depending on your
configuration, some mating cables may be provided as part of the drone kit.
Figure 56. Breakout Board Connectors
Power Out
Power for external devices provided from 12V BEC internal to the chassis. Maximum draw of 5 Amps.
•
Connector ID:
J6
•
Breakout board connector:
Molex 1054301102
•
Mating connector:
Molex 1053071202
•
Mating connector crimp pins:
1053001100
•
.
Serial Out
Extension of the Telem2 serial port on the carrier board. In Ardupilot this port is typically referenced as Serial2
and, as long as Serial0 and Serial1 are set to use the Mavlink protocol, the parameter rates are typically set with
the SR2 commands. This is a one-to-one connection that mimics the port on the carrier board.
•
Connector ID:
J4
•
Breakout board connector:
JST SM06B-GHS-TB(LF)(SN)
•
Mating connector:
JST GHR-06V-S
•
Mating connector crimp pins:
JST SSHL-002T-P0.2
Table 2. Power Out Pinout
Pin
Description
1
Ground
2
12VDC
Содержание RangePro RPX8-P
