10
V…………………………volts
A…………………………amperes
Hz……………………….hertz
~…………………….….alternating current
…/m……………….....revolutions per minute
.....................class II construction (double insulated)
Kg………………………..kilograms
n
0
………………………..No load speed
……………….….....Conforms to European Harmonised New Approach Directives.
DC ………………..…….Direct Current
Important!
The vibration value changes according to the area of application of the electric tool and
may exceed the specified value in exceptional circumstances.
Specific Safety Rules
1) Hold power tools by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring.
Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the
operator.
2) Wear ear and eye protection. To avoid hearing loss and eye injuries.
3) If the bit becomes jammed, immediately turn the trigger switch off to prevent an overload
which can damage the motor. Use reverse to loosen jammed bits.
4) Do NOT operate the Forward/Reverse lever when the trigger switch is on. Damage to
the unit may occur.
5) When storing or carrying the tool, set the Forward/Reverse lever to the center
position (switch lock).
6) Do not strain the tool by holding the speed control trigger halfway so that the motor
stops.
7) Be careful not to get dust inside the chuck.
8) Do not touch the rotating parts to avoid injury.
9) Do not use the tool continuously for a long period of time. Stop using the tool from time
to time to avoid overheating of the motor.
10) Do not drop the tool.
Symbols
IMPORTANT: Some of the following symbols may be used on your tool.
