800mm babyleaf harvester
Instruction manual
800mm babyleaf harvester
Instruction manual
www.terrateck.com
www.terrateck.com
36
37
(26) Check that the control lever is placed in front of the trigger of the drill; if necessary, adjust the height of the control mecha-
nism to fit the drill
Trigger of the combi-drill
Control lever
(27) Check that the control cord passes under the right
half-handle so that it can properly activate the trigger of the
combi-drill.
(28) Check that the cord is taut. If necessary, tighten or loosen
the side bolts. Cut the protruding end with a saw to avoid any
injury when moving around the harvester
OPERATING INSTRUCTIONS
BEFORE YOU START
Before starting up the harvester, you must follow some basic procedures to ensure that the workers are safe and the harvester
is being operated properly, as well as guarantee the longevity of the machine.
Walk around the machine to visually check the following:
(29) Check the condition of the tyres. Watch out for any premature wear, blistering or abnormal tears, in which case you will need
to change the tyre(s).
See (82) and (83).
(30) Remove the cutter guard.
(31) Make sure that all of these housing elements are in place and secure. If the safety devices are damaged or do not work,
consult your Terrateck agent.
(32) Check the tension of the control cord: tighten/loosen the two side bolts to ensure that there is enough tension and that the
pressure on the trigger of the drill is adequate. See (28).
(33) Before using the machine, check that your power tool works properly
Do not smoke when working near the screw gun battery. There is a risk of an explosion.
!
IMPORTANT
