Function
The SINE SLM 162 has 8 stereo channels, i.e. 16 separate inputs. These inputs are
intended for signals amplified to line levels such as keyboards, preamps, drum computers
and the like. Please do not connect microphones or electric guitars directly to the mixer.
Please use the included 12 V AC power adapter to connect the SINE SLM 162 Mixer to
an AC power source. After turning the mixer on with the POWER switch, the first LEDs of
the LED chains indicate that the device is operational.
The INPUTS (rear panel) can be used as follows:
External source
SINE SLM 162
Stereo (2 mono outputs)
INPUT left and right
Stereo (1 stereo output)
INPUT left (stereo jack)
Mono (1 mono output)
INPUT right (mono jack)
When properly connected, the SINE SLM 162 mixer will automatically detect the connec-
tion type.
The VOLUME controls regulate the volume of the incoming signal; the BALANCE control
regulates the relative volumes of the left and right stereo channels.
The MASTER VOLUME control regulates the overall volume of all connected audio
sources and adjusts the SINE SLM 162 to suit a main mixer, power amplifier or recording
interface.
The level displays indicate an overload of one or both channels when the LED chains are
completely lit. When set up optimally, the last two LEDs (+12 dB) should not light up. Also
ensure that the volume of the individual channels is always higher than that of the master
control.
Technical data
Input level
-14 dB
Output impedance
600 ohm
Signal-to-noise ratio >97 dB
Input impedance
10 kohm
Gain
-00 to 28 dB
Frequency response 4 Hz – 20 kHz
Dimensions
482.6 x 87 x 44 mm (19”, 1U)
SINE SLE 82, SLM 82, SLM 162 (English)
11
