/ TerraTV Radio+
45
Troubleshooting - Video Sequence Recording
1. The recorded video sequence seems jumpy.
In this case, there are several possible solutions:
Lower the video format to be recorded through the menu point
Options\Video Format
Lower the set number of frames per second through the menu point
Options\Video Re-
cording Settings
By going through the menu point
Options\Compression
set the compression process to
Brooktree ProSumer Video (32)
Be sure to read the topic
Attention Trap – Recording Parameters of Video Sequences
in
this online manual.
2. A very high dropped-frame rate is displayed.
The possible solutions to this problem are the same as with the first point.
3. No sound is being recorded with the video sequence.
For any sound to be recorded, the output of the TV card has to be connected with the input
of the sound card. If the TV card's output is connected to the sound card's input with the
connector cable provided, you should try double clicking on the
volume control icon
in the
taskbar
. There, choose the menu point
Options\Properties
. Set the
Adjust volume for
op-
tion to
Record
and confirm your choice by clicking on
OK
. Now activate the control box un-
der the Line-In slider and set the slider to the middle position. Now you should be able to
record with sound.
