/ TerraTV Radio+
19
Connecting an External Device with Scart Out
If you want to connect a device that has a scart out, you will need a special adapter cable to
make the connection to the TV cable.
Scart cable
The cable you will need must have a scart port on
one side which you plug into the external device.
The other side will have three male cinch plugs
(see illustration left). The three cinch plugs will
carry the left and right audio signals as well as the
video signal.
For you be able to connect the left and right audio
cables with the Line-In input of your sound card,
you will need
y-cable
the other two cinch connectors and a y-cable (see
illustration).
cinch connectors
Proceed with the connection to the TV card as follows:
1.
Connect the cinch plug for video with the
Video In
of the TV card.
2.
Connect the scart cable's
left audio
and
right audio
to the two
cinch connectors
and
the
y-cable
.
3.
Plug in the y-cable's jack plug to the
Line In
input of your sound card.
4.
Under the menu point
Options\Video Source
in the TV software choose the setting
Composite
, so that the video picture of the external device will be shown. You can
also set the video source composite by clicking on the
V
-button on the left side of the
symbol bar in the TV software.
NOTE!
When attaching a scart cable, please read the following segment
Attention! - Connecting
Audio to the TV Card.
