TerraTec phonoPreAmp studio USB, Руководство пользователя

Страница: 7 / 27

phono PreAmp Studio USB (English) 7

Signal and peak display
These two LED lamps conveniently let you know that the phono PreAmp hardware is
working. If the unit is connected correctly and is receiving an audio signal, the signal
LED is lit. Its brightness changes according to the strength of the input signal. The
peak LED lights if the signal level is too high, causing overamplification. For adjusting
input levels, see item
‘
regarding the “Input-level selector switch”.

Input-range selector switch
Please refer to the technical documentation of your phono pick-up system for the rec-
ommended input capacity range for the preamplifier. Then set this selector switch to a
value that best matches this range. If you cannot find any technical documentation for
your pick-up cartridge, set the selector switch to its middle position.
‘
Input-level selector switch
Use this to select the type of input signal and how it is to be preamplified. You can se-
lect between minimum (Min) and maximum (Max) preamplification. If you are re-
cording a line-in signal, select the Line in option. In this case, also refer to the chapter
entitled,
Recording.