NOXON
40
ENGLISH
In the next step, set your preferred alarm clock volume with the
Up/Down buttons. This setting is particularly useful if you have used the
sleep timer function to rock you gently to sleep the night before—
because the volume of the alarm clock can be set entirely independ-
ently, you don't need to worry your sleepy head about the volume of the
iRadio in normal operation—it will wake you up with the volume you set
here.
Press the Right button to confirm and your alarm clock is ready.
The displays in the main menu and the Alarm Clock menu now show the
alarm readiness based on the time(s) set, and a small bell appears in
the clock display for each active wake-up time. These can be viewed
with the
button.
Setting maximum alarm and snooze durations
To configure the maximum total duration for your morning wake-up call,
or the duration between wake-up calls (snooze function) before the
alarm function is finally deactivated, select the "Alarm Settings" menu
item. You can now make your personal settings here.
Switching the alarm clock on and off
To switch the alarm(s) on and off without having to reset all the items
described above, simply select "ON/OFF" in the Alarm Clock menu.
Now you have the option to enable or disable the alarms, either all at the
same time or individually, without having to go through the complete set
up procedure described above.
When the alarm clock goes off… deactivating and alarm repeat
As soon as the alarm clock is activated, the iRadio switches from its
previous state to Alarm mode, which looks something like the illustra-
tion on the left. Depending on the setting in the setup menu and your
firmware version, the wake-up screen appears either in full brightness
or somewhat dimmed (refer to page 25). You now have two choices: get
up or go back to sleep! The alarm clock is only deactivated with the
Stop button. Pressing any of the other buttons on the device will return
the iRadio to the land of dreams again as well, though the alarm display
will remain active until you definitively deactivate the alarm clock.
Until then, the alarm clock will make its presence known repeatedly at
the preset snooze intervals.
