Installation steps
● Insert the light sources of your choice into the appropriate socket. Take care of the maximum
allowed power level!
● The T5 fluorescent lamp is very fragile, handle with care!
installation of T5 fluorescent lamp
removal of T5 fluorescent lamp
● Place the prepared lamp fixture on top of the terrarium so that the light sources are down. Pay
attention to the position of the lamp fixture on the metal mesh or perforated metal plate on the top
of the terrarium. Light and heat must enter through it the terrarium!
● Fluorescent tubes are hazardous waste! Please do not dispose of in municipal waste, but in
designated waste disposal sites.
● If necessary, check the position of the silicone rubber at the bottom of the lamp fixture. This
ensures that the equipment is properly adhered to the glass parts of the terrarium.
● Connect the mains power cord!
● Use the switches to select the light source you want to operate.
● Check the temperature in the terrarium several times a day to prevent harm to the animal. If the
area is too hot, adjust the heating settings in the menu system and / or use a lower power heat or
light source.
● Remember to turn the lights on and off to suit the needs of the animal in the terrarium. Check with
your dealer or breeder.
11/12
Document number:
TC-HUJJ-2020/01-EN v3.2
