Design and application
The
Azure
650
lamp fixture is used for assuring the living conditions close to the natural for the pets living
in terrarium. Thanks to the aluminum casing, it has a long life.
This equipment can be connected to a 230 V
∼
/ 50 Hz mains power using a C13 and plug connector
cable:
In design, we have focused on maximizing the efficiency of different light sources with regard to
appearance and safety. To this end, a reflective plate is placed inside the lamp fixture, and down
oriented sockets ensure a more efficient use of light and heat. The cutouts on the top of the lamp fixture
facilitate the exchange of terrarium air through the flow of natural cold and warm air. Good heat
dissipation and fit to the terrarium as well as the overall view of the terrarium and the lamp fixture were
also important aspects.
The side E27 sockets are designed to be directed downwards. In this way, the effect of the light or heat
source used in it is much more utilized. In order to make better use of UV light, a reflective plate was
installed, which also directs the rays towards the terrarium.
1
E27 left socket
2
G5 sockets for T5 tube
3
E27 right socket
Three types of light or heat sources can be selected, and additional heating and humidification can be
connected to the power sockets on the rear panel. The loads on the outputs can be 230V equipment.
Each power socket performs on-off switching, no dimmed output available.
8/15
Document number:
TC-HUJJ-2020/02-EN v3.3
