
Copyright
©
2007 Terramite Corporation
2.4
WWW.TERRAMITE.COM/SAFETY
Charleston, WV/USA
USA 1.800.428.3772
Intl. 1 .304.776.4231
Read Operators Manual For Safety
PARTS MANUAL
Service Operations
&
transmission in a truck. As we depress the foot pedal
further, the engine RPM remains about the same, but the
Terramite Street Sweeper picks up speed over the ground.
The big difference between driving the Terramite Street
Sweeper and a truck is that if you want power to start up
a hill, you need only depress the foot pedal about a third of
the way forward, not to the floor. If you want speed, you
start off with a small amount of pedal and keep increasing
as the speed builds up and the required torque decreases.
No Gear Shift
When the drive pedal is in neutral position, it’s like applying
a brake. Anytime the engine tends to slow, let up on the
pedal a little. You have to experience it to appreciate it.
Although somewhat different in its control, the hydrostatic
transmission is very easy to use and very forgiving. It
takes only minutes to get used to, and is simpler to use
than an automatic transmission in an automobile.
Some “Don’ts”
Excessive RPM can damage the engine and make the
controls overly responsive. Do not change the relief valve
settings. They are factory set for best machine
performance. Do not go from forward to reverse or reverse
to forward without pausing at neutral. It may damage the
drive train.
Getting Started
Now we are ready to get aboard. Make certain that there
is no oil on the steps, which might cause you to slip and
fall. Your seat may be adjusted to different positions by
pulling the lever located under the seat on the right. Before
starting the engine, be sure to fasten your seat belt.
Terramite Corporation believes that a seat belt should be
worn at all times.
Some Never, Never, Nevers
Never use the Terramite Street Sweeper for a job it wasn’t
intended to do. Never use any other part of the machine
as work platform or a personnel carrier. Never allow
anyone to be under, or even close to the broom or any part
of the sweeper. Never touch the hydraulic components
when, or right after, the machine has been working. They
reach temperatures in excess of 200 degrees and can give
you a severe burn.
Slow Down, Speed Kills
Be particularly alert when backing or working in crowded
areas. Always operate the Terramite Street Sweeper at a
safe speed, keeping in mind your safety and that of any
other people working in the area.
Not Too Much at One Time
As a beginner, this practice will require your total
concentration. Therefore, while learning to use the street
sweeper, we recommend that you do not put in over half
an hour of practice without a half-hour break. Confusion
and panic can be brought on from mental exhaustion, which
can occur very rapidly until the use of the controls becomes
a somewhat automatic reaction. Long sessions, requiring
extreme concentration, can be potentially dangerous.
Working on a Slope (Use Extreme
Caution)
Now we will cover one of the most important considerations
in operating the Terramite Street Sweeper. Naturally, you
will be working on some degree of ground slope much of
the time unless you live in very flat country. We feel it is
extremely important that we impress upon you just how
treacherous a slope can be when using this machine,
particularly under certain conditions. If you operate on a
hillside that is slippery and/or steep enough that there is
any question that the Terramite Street Sweeper will not be
able to maintain braking action, you will be taking your life
in your own hands. Unless you are absolutely sure that
you can accomplish the work without risk, do not attempt
it. A slick surface, such as dry leaves on even a slight
grade, may cause your rear tires to slide out of control
without any braking action whatsoever.
Emergency Procedures
Before working a hazardous area such as a hillside, take
time to consider every possible problem you might
encounter. Be sure you are mentally prepared for any
situation and know exactly what you might do in an
emergency. Remember, panic is your worst enemy, and
panic usually comes when you are caught completely off
guard and unprepared. Safety conscious operators run
through emergency procedures before operating under any
conditions that give them concern.
Safety Guidelines (continued)
Содержание TSS36
Страница 1: ...Courtesy of Machine Market ...