10
Supply
Group address
Module address
No 1
1
1
No 2
1
2
In order to enable the communication of an UP412 power supply with a device server of optical transmitter, the data bus connector of the UP412 has
to be connected to the data bus connector of the transmitter (Figure 1, pos 7), as shown in the diagram below. The data and power distribution cables are
supplied together with the optical transmitter.
Note
:
1. The server can manage only up to two UP412 devices.
2. Please pay attention to the different power supply settings. Address of power suppliers does not have to match and will be as follows:
Table 6
. Address settings of power supply
Figure 15. Application diagram of mo418L installation with redundant power supply and WEB/SNMP control possibility.
