8.
Open the outer valve cap on each Airflex pole and press the centre sprung button on each to
deflate the poles. Wait for most of the air to escape and leave them open whilst you pack
the awning away.
9.
Now remove the pegs at the corner of the groundsheet and also from the end guy lines. Tie
up the guy lines to prevent tangles. Detach the awning from the van and fold the connecting
tunnel onto of the flysheet.
10.
Fold the awning so the folded seams are in line with the Airflex pole direction and so the
groundsheet does not come in contact with the outer fabric of the flysheet to help keep the
flysheet clean. Fold until the awning is the width of the storage bag and then place the
fibreglass/ridge pole bag on top and roll it up towards the valve side of the awning to expel
all of the air. Place the valve end of the awning on the small attached tarp of the storage bag
and simply roll the awning into the bag. Please see the following diagrams.
