background image

581-706 5” OD Arch Post Swing 8’ 6 Seat

IMPORTANT 

 

PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY.  All equipment 
must be installed in accordance with these instructions.  Check your shipment 
against Bill of Lading and Parts list.  Any missing or broken parts must be 
reported to your distributor within 10 days of receipt of your order.  When 
properly installed and maintained, equipment will give many years of Safe, 
Trouble-Free use.  Periodically check for loose or broken parts.  Loose bolts 
must be tightened and broken parts must be replaced as they can possibly 
create dangerous situations leading to unnecessary accidents.  Resilient 
Surfacing should be used under all playground equipment.  Appropriate 
publications, available at no charge, from the Consumer Product Safety 
Commission, include “A Handbook for Public Playground Safety”.  You can 
receive your free copy by calling 1-301-504-7908. 

 

 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 

 

 
 
 

PACKING LIST

HARDWARE BAG

CTN 

 

Hardware Bag 

12

585-521 

3 ½” Swing Hanger 

PIPE 

583-211 

3 ½” Top Rail 

6

585-955 

Cut Proof Belt Seat 

WF 

583-573 

Center Arch Posts 

12

317-140 

4/0 Chain 5’6” 

WF 

583-572 

End Arch Posts 

24

585-901 

S Hook 

 

 

 

 

12

196-802 

½” x ½” Socket Set Screw 

 

 

 

 

1

416-400 

¼” Socket Key 

  

 

 

1

805-532  Warning 

Label 

  

 

 

1

805-534  SportsPlay 

Label 

  

 

 

1

 

Maintenance 

Checklist 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 CTN  

3 PIPE  

4 WF   

TOTAL PCS= 1 SKID 

1019 # WT 

 

Class 70 

Содержание 581-706

Страница 1: ...they can possibly create dangerous situations leading to unnecessary accidents Resilient Surfacing should be used under all playground equipment Appropriate publications available at no charge from the Consumer Product Safety Commission include A Handbook for Public Playground Safety You can receive your free copy by calling 1 301 504 7908 PACKING LIST HARDWARE BAG 1 CTN Hardware Bag 12 585 521 3 ...

Страница 2: ...es up to 2 3 8 diameter Varying soil climatic conditions may require deeper and heavier footings in some areas Check local building codes Detail Detail Permanent Installation Suggested Bracing Method IF RESILIENT SURFACING IS TO BE LESS THAN 12 THEN ADDITIONAL PIPE SHOULD BE PUT IN CONCRETE TO MAINTAIN PROPER FINISH GRADE FOR EQUIPMENT USE AREA AND FOOTING LAYOUT ...

Страница 3: ...UCTIONS Check MONTHLY for loose bolts damaged or broken parts Tighten and or replace immediately On swings and any equipment that uses S hooks and or Swing Hangers check the bearing surfaces for wear Replace any parts that show a reduction of 25 from the original size ASSEMBLY AND INSTALLATION NOTE All threaded ends of bolts protruding beyond nuts must be cut off and or peened to eliminate sharp e...

Страница 4: ...der intended level of resilient surfacing and top rail is at desired height STEP 6 Plumb and level entire unit Tighten set screws by using short length of pipe on end of socket key to add leverage Pour concrete Crown surface Wait 48 hours before removing braces and using equipment STEP 7 Attach assembled seats to swing hangers by reattaching the pendulums to the swing hangers Do not over tighten b...

Отзывы: