18
USE
Use Attention: the fan can be used only when completely and correctly assembled,
that is complete with its base. Before each use, verify that the unit is in good
condition, the electric cord is not damaged, if the power cord is damaged, it must be
replaced by the manufacturer or a competent qualified electrician or a person with
similar qualifications, in order to avoid any risk. The fan's functions can be controlled
either with the keypad located on the control panel or with the remote control. The
remote control must be pointed at the control panel; for the first use take off the tab
transparent plastic of the batteri’s side (type AAA). Insert the plug in the socket.
Ventilation
:
1) To turn the fan on, press the “ON/SPEED” key on the remote control or the control
panel.
2) To select the desired speed in normal mode “NOR”, repeatedly press the “ON-
SPEED” key: on the control panel shows the selected speed (Low=minimum,
Med=medium, Hi=maximum) and “NOR”.
Horizontal oscillation
(right-left): this is controlled by the “OSCIL” key on the
remote control or the pushbutton panel (14).
To eliminate this motion, press the “OSCIL” key again. Vertical inclination (high-low):
it is regulated by gripping the motor body and orienting it in the direction desired;
throught the screw (10) to lock the body in the desired position.
Timer:
this function allows setting the operating time and the fan will automatically
stop at the end.
To set the operating time, repeatedly press the “TIMER” key on the remote control:
every time the key is pressed, the time set is changed and the indicator light on the
control panel lights corresponding to the time selected (0.5 hour, 1 hour, 2 hours, 4
hours, ecc….): the maximum time is 7,5 hours.
To eliminate this motion, press the “0-OFF” key again.
Mode:
the fan can work at a constant speed “NOR”or with two different intermittent speeds:
In “RHY” mode, the fan alternates between the maximum and minimum speed and
turns-off for several seconds. In “Sleep” mode, the fan alternates with speeds and
interruptions different from the preceding. The mode is selected by pressing the
“MODE” key on the remote control (15). To turn the fan off, press the “OFF” key on
the remote control or control panel, then remove the plug from the socket. When not
in use for long periods, the plug must always be removed from the socket.
